Senior Lead Engineer(s) – Vehicle Integration (Full time)

//Senior Lead Engineer(s) – Vehicle Integration (Full time)

Senior Lead Engineer(s) – Vehicle Integration (Full time)

  • Job Title : Senior Lead Engineer(s) (Full Time)
  • Location: Novi, MI

Level of Experience:

  • Should work in Novi, Michigan and various unanticipated locations throughout the U.S. to perform vehicle integration of heavy commercial vehicles in the automotive industry.
  • Responsible for gathering requirements, collecting inputs, and engineering calculations and checklists.
  • Perform product feasibility study in the development of new variant design.
  • Develop conceptual layout with respect to customer requirements.
  • Perform system level review of DFMEA (Design Failure Mode and Effect Analysis) and DVP&R (Design Verification Plans & Reports).
  • Manage and report VA/VE cost saving opportunities. Investigate and make countermeasures for current production field issues.
  • Develop system and component level specifications. Interface with the design office for 1st surface appearance and feasibility.
  • Responsible for product specification, engineering sketch and layouts release in PLM.
  • Perform component DFMEA (Design Failure Mode and Effect Analysis). Develop plans and reports.
  • Participate in proto build coordination. Involved in Design for Six Sigma (DFSS) and Advance Product Quality Planning (APQP).
  • Responsible for material procurement and follow-up. Participate in homologation document preparation.
  • Responsible for vehicle testing co-ordination. Coordinate with client on pilot build and production (direct plant interaction).

Qualification:

  • Master’s Degree (or foreign equivalent) in Mechanical Engineering, Industrial Engineering, or related field, plus three (3) years of automotive engineering experience.
  • Two (2) of the three (3) years of automotive engineering experience must include experience with the following: (1) 2D and 3DCAD modeling; (2) Report generation using DMU (Digital Mock Up); (3) CATIA / UGNX software OR AutoCAD software; AND (4) Design Failure Mode and Effect Analysis (DFMEA) preparation.
  • In the alternative, we will accept a Bachelor’s Degree (or foreign equivalent) in Mechanical Engineering, Industrial Engineering, or related field, plus five (5) years of progressive post-bachelor’s degree automotive engineering experience.
  • Two (2) years of the five (5) years of progressive automotive engineering experience must include experience with the following: (1) 2D and 3DCAD modeling; (2) Report generation using DMU (Digital Mock Up); (3)  CATIA / UGNX software OR AutoCAD software; AND (4) Design Failure Mode and Effect Analysis (DFMEA) preparation. All experience may be acquired concurrently.
  • Travel and/or relocation may be required. EOE.

Please apply by emailing your resume to Sudharsanan Padmanabhan at Sudharsanan.Padmanaban@hindujatech.com; and please indicate the reference code HT03 in your communication. EOE.

By |2020-06-19T14:27:54+05:30June 18th, 2020|Categories: jobs|0 Comments
Translate »



OUR SEGMENTS
PASSENGER
COMMERCIAL
OFF-HIGHWAY